CS2 Motor Protection Circuit Breaker

Short Description:

Motor protector (also known as motor protector) is the function of comprehensive protection for motor, the motor start time, over-current, owe flow, locked-rotor, phase, short circuit, overvoltage, undervoltage, electric leakage (ground), three-phase imbalance, overheating, bearing wear, the rotor eccentricity, external fault, calls from the start, the time limit, the alarm or protection device.

Send email to us

Product Detail

Product Tags

Description

Electric value: AC690V, 32A, 80A;
Standard: IEC/EN 60947-2, IEC60947-4-1

Type Designation

Operating Condition

3.1 Temperature: -5 ℃～+40℃ ,average temperature in 24 hours not exceed +35 ℃
3.2 Altitude: not exceed 2000m
3.3 Air conditions:
At mounting site, relative humidity not exceed 50% at the max temperature of +40℃, higher
relative humidity is allowable under lower temperature,for example, RH could be 90% at +20℃
3.4 Pollution grade: Grade Ⅲ
3.5 Release grade: 10A(CS2-32) 10A(CS2-80)
3.6 Rated operational system: Continuous operational system
3.7 Mounting conditions:
The inclination between the mounting plane and the vertical plane shall not exceed 5 ° The product shall be installed and operated at a place without obvious shake, Impact and vibration.

Technical Specification

4.1 Protection property

Series No.	Multiple of setting current	Initial status	Time		Expected results	Ambient temperature
1	1.05	Cold status	t≥2h		Non-tripping	+20℃±2℃
2	1.20	Heat status (right after test.1)	t＜2h		Tripping	+20℃±2℃
3	1.50	Heat status (right after test.1)	Tripping class	10A t＜2min	Tripping	+20℃±2℃
				10 t＜4min
4	7.20	Cold status	Tripping class	10A 2s＜t≤10s	Tripping	+20℃±2℃

Phase failure protection properties

Series No.	Multiple of setting current		Initial status	Time	Expected results	Ambient temperature
	Any 2 phase	The other phase
1	1.0	0.9	Cold status	t≥2h	Non-tripping	+20℃±2℃
2	1.15	0	Heat status (right after test.1)	t ＜2h	Tripping	+20℃±2℃

Temperature compensation properties

Series No.	Multiple of setting current	Initial status	Time	Expected results	Ambient temperature
1	1.0	Cold status	t≥2h	Non-tripping	+40℃±2℃
2	1.2	Heat status (right after test.1)	t＜2h	Tripping	+40℃±2℃
3	1.05	Cold status	t≥2h	Non-tripping	-5℃±2℃
4	1.3	Heat status (right after test.3)	t＜2h	Tripping	-5℃±2℃

Model of overload relay	Code	Rated current (A)	Rated ultimate short-circuit breaking capacity Icu(kA)			Rated service short-circuit breaking capacity Ics(kA)			Standard rated power of three-phase motor (kW)
			230/240V	400/415V	660/690V	230/240V	400/415V	660/690V	230/240V	400/415V	660/690V
CS2-32	3201	0.1~0.16	100	100	100	100	100	100	-	-	-
	3202	0.16~0.25	100	100	100	100	100	100	-	-	-
	3203	0.25~0.4	100	100	100	100	100	100	-	-	-
	3204	0.4~0.63	100	100	100	100	100	100	-	-	0.37
	3205	0.63~1	100	100	100	100	100	100	-	-	0.55
	3206	1~1.6	100	100	100	100	100	100	-	-	1.1
	3207	1.6~2.5	100	100	3	100	100	2.25	0.37	0.75	1.5
	3208	2.5~4	100	100	3	100	100	2.25	0.75	1.5	3
	3210	4~6.3	100	100	3	100	100	2.25	1.1	2.2	4
	3214	6~10	100	100	3	100	100	2.25	2.2	4	7.5
	3216	9~14	100	15	3	100	7.5	2.25	3	5.5	9
	3220	13~18	100	15	3	100	7.5	2.25	4	9	11
	3221	17~23	50	15	3	50	6	2.25	5.5	11	15
	3222	20~25	50	15	3	50	6	2.25	5.5	11	18.5
	3232	24~32	50	15	3	50	6	2.25	7.5	12.5	22
CS2-80	8025	16~25	-	15	-	-	7.5	-	5.5	11	-
	8040	25~40	-	15	-	-	7.5	-	11	22	-
	8063	40~63	-	15	-	-	7.5	-	15	33	-
	8080	56~80	-	15	-	-	7.5	-	22	45	-