Low Voltage H.R.C Fuse

Short Description:

1.Piercing connector, simple installation, need not strip the cable coat
2.Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead
3.Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector
4.Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al
5.Small electric connecting resistance, connecting resistance less than 1.1 times of the resistance of branch conductor with the same length
6.Special insulated case body, resistandce to illumination and environmental aging, the insulation strength can up to 12KV
7.Arc surface design, apply to connection with the same(diﬀerent) diameter, wide connection scope(0.75mm2~400mm2)

Send email to us

Product Detail

Product Tags

Applications
This series of fuse links is mainly used in AC 50Hz, rated voltage up to 1140V, rated current up to 1250A and for protecting electric equipment from overload and short-circuit. It can reliably break the min. fusion current to any current within120KA.
It is also available for the protection of semiconductor parts and equipments against short-circuit(type aR) and protection of
motors(type aM).
This series of fuse links conforms to GB13539 and IEC 60269 standards.

Design Features
It adopts the material with high quality. The arc-extinguishing medium is quartz sand fuse tube is high strength ceramic. The advanced
manufacturing craft work ensures the performance of small power waste, stable characteristic for the product. The outline structure
and installation dimension joints the advanced similar products from domestic and abroad.

Basic Data
The model, outline dimension, rated voltage and rated current are shown in Figures.